Field Description
System Selection Select one of the following methods to
disco
ver the storage system.
■ Auto Discovery: Acquire the storage
system information automatically.
(default)
■ Manual: Specify the storage system
manually.
IP Address (CTL 1) Enter the IP address for controller 1.
Accept the default IPv4 setting or select
IPv6, and then enter the IP address in
the appropriate format for the
addressing method selected.
IP Address (CTL 2) Enter the IP address for controller 2.
Accept the default IPv4 setting or select
IPv6, and then enter the IP address in
the appropriate format for the
addressing method selected.
Installing the SVP software on a guest OS
Chapter 8: Installing the SVP software on a Microsoft Hyper-V Server 2012 R2 Virtual Machine
Service Processor Technical Reference 173
To Next Page
Loading...
