Hitachi UX2 - Page 113

Chapter 5 Creation and Setting of Print Messages
5-31
Chapter 5.
(9) [Printing method]
● Displays the printing method.
● There are the following two printing methods: [Single scan] and [Interlaced].
● The printing method will be automatically set according to the [Print format] and [Ink Drop Charge
Rule] settings.
● To print with [Interlaced], set as follows:
(a) The print format is the same for all items.
(b) The number of lines is the same for all columns.
(c) [Ink drop use] is 1/1 to 1/4.
This easily sets [Interlaced].
For one-line printing, [Single scan] is applied regardless of (a) through (c).