Hitachi UX2 - Page 142

Chapter 6. Character Print
6-24
(2) Count condition setup example
(a) Number from "000" to "999" in increments of 1.
Example of [Count conditions] setup screen (1)
Count result
[Note] Set the range for each digit.
Setting the range from "001" to "999" ends up being the following count result because
"0" is excluded from the ones place.
Count result
001 002 003 .... 008 009
011 012 013 .... 018 019
021
000 001 002 ... 998 999