Hitachi UX2 - Page 190

Chapter 7. Auxiliary Functions
7-34
(4) Data copy operation from other models
● Data created on RX, RX2 or UX can be copied to UX2.
Following operations 1 through 3 must be conducted prior to using other models' data on UX2 to store the
backup data of other models in the USB memory via a PC.
1
Create a "UX2DAT" folder if it does not already exist in USB memory.
2
Create a new folder with the name of the printer's model name (UX/RX) under the
"UX2DAT" folder created in 1. above. In case of RX2, create a new folder "RX".
3
UX
Copy the backup serial number folder which is created on UX under the "UX"
folder created in 2.
RX,
RX2
Copy the backup serial number folder which is created on RX or RX2 under the
"RX" folder created in 2.
● Refer to "(3) Data copy operation" to copy data after data is stored in USB.
● The button is displayed in different colors by models when folder to be copied is selected.
Data to be copied
Display color of the serial number
UX
Blue
RX/RX2
Brown
■ USB memory
■ UX2DAT
■ UX
■ 00000000
■ USB memory
■ UX2DAT
■ RX
■ 00000001