OPERATING THE ENGINE
3-3
STARTING THE ENGINE IN ORDINARY TEM-
PERATURE
1. Pull the pilot control shut-off lever (1) up to the LOCK
position.
2. Turn key switch (2) to ACC or ON position.
3. Sound horn to alert bystanders.
4. Turn engine control dial (3) to the slow idle position.
IMPORTANT: Prevent starter damage.
Never operate starter motor for more
than 20 seconds at a time. If engine fails
to start, return key switch to OFF. Wait
for more than 30 seconds, then try again.
After a false start, do not turn key switch
until engine stops or starter may be
damaged.
5. Turn key switch (2) to start engine. Release key
switch. It will return to ON position.
M1CC-01-017
M1CC-01-005
M178-01-011
LOCK Position
3
1
2
Slow Idle
To Next Page