EasyManua.ls Logo

Hitachi ZAXIS 70 - Use Handholds and Steps; Adjust the Operators Seat

Hitachi ZAXIS 70
317 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SAFETY
S-5
USE HANDHOLDS AND STEPS
x
Falling is one of the major causes of personal injury.
When you get on and off the machine, always face the
machine and maintain a three-point contact with the
steps and handrails.
Do not use any controls as handholds.
Never jump on or off the machine. Never mount or
dismount a moving machine.
Be careful of slippery conditions on platforms, steps,
and handrails when leaving the machine.
008-E01A-0439
SA-439
ADJUST THE OPERATOR’S SEAT
x
A poorly adjusted seat for either the operator or for the
work at hand may quickly fatigue the operator leading to
misoperations.
The seat should be adjusted whenever changing the
operator for the machine.
The operator should be able to fully depress the ped-
als and to correctly operate the control levers with his
back against the seat back.
If not, move the seat forward or backward, and check
again.
009-E01A-0378
SA-378

Table of Contents