EasyManua.ls Logo

Hitachi ZAXIS 70 - Avoid Tipping; Never Undercut a High Bank

Hitachi ZAXIS 70
317 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SAFETY
S-14
AVOID TIPPING
DO NOT ATTEMPT TO JUMP CLEAR OF TIPPING
MACHINE --- SERIOUS OR FATAL CRUSHING INJU-
RIES WILL RESULT
MACHINE WILL TIP OVER FASTER THAN YOU CAN
JUMP FREE
FASTEN YOUR SEAT BELT
x
The danger of tipping is always present when operating
on a grade, possibly resulting in serious injury or death.
To avoid tipping:
x
Be extra careful before operating on a grade.
Prepare machine operating area flat.
Keep the bucket low to the ground and close to the
machine.
Reduce operating speeds to avoid tipping or slipping.
Avoid changing direction when traveling on grades.
NEVER attempt to travel across a grade steeper than
15 degrees if crossing the grade is unavoidable.
Reduce swing speed as necessary when swinging
loads.
x
Be careful when working on frozen ground.
Temperature increases will cause the ground to be-
come soft and make ground travel unstable.
025-E01B-0495
SA-012
SA-440
NEVER UNDERCUT A HIGH BANK
x
The edges could collapse or a land slide could occur
causing serious injury or death.
026-E01A-0489
SA-489

Table of Contents

Related product manuals