OPERATING THE ENGINE
3-1
INSPECT MACHINE DAILY BEFORE START-
ING
ELECTRICAL SYSTEM
Check for worn or frayed wires and loose connections.
BOOM, BUCKET, SHEET METAL, TRACKS
Check for bent, broken or missing parts.
HARDWARE
Check for loose or missing parts.
FUEL SYSTEM
Drain water and deposits from fuel tank.
HYDRAULIC SYSTEM
Check for leaks, kinked hoses, and lines or hoses that rub
against each other or other parts.
LUBRICATION
Check lubrication points on the Periodic Service Chart.
PROTECTIVE DEVICES
Check guards, fenders.
SAFETY
Walk around machine to clear all bystanders/obstacles
from machine area.
To Next Page
Loading...
