Hitachi ZW310 - Ride Control Switch (Optional)


1-57

Damps the vertical vibration of the front attachment during
drive operation so that comfortable machine ride quality is ob-
tained. As stable drive operation is achieved, bucket load spill
can be reduced.
  









    
     






   


When the switch (6) is turned ON, the drive speed sensor and
the controller is activated. Then, when the drive speed be
-
comes faster than 5 km/h, the ride control system automati-
cally operates. When the drive speed becomes slower than 3
km/h, the ride control system becomes inoperable. When the
switch (6) is turned ON, the monitor indicator (25) comes ON.
When the switch (6) is turned OFF, the monitor indicator (25)
goes OFF so that the ride control system becomes inoperable.
When the ignition switch is in the OFF position, the ride con-
trol system does not operate even if the ride control switch is
turned ON.
M4GB-01-050
M4GB-01-085
M4GB-01-040

 

