Hitachi ZW310 - Preheat Lamp; Turn Signal Indicator; High Beam Indicator; Work Light Indicator


1-12

The engine is being preheated as long as the preheat lamp
stays ON. When the preheat lamp goes OFF, engine preheating
is completed.

When the turn signal lever is operated, the turn signal and the
indicator start flashing.

When the head lights are used at the high beam position, the
indicator will light.

When the work lights are turned ON, this indicator will come
ON.

When the clealance lights are turned ON, this indicator will
come ON.
M4GB-01-031
M4GB-01-032
M4GB-01-033
M4GB-01-034
M4GB-01-035