Hitachi ZW310 - Parking Brake Switch


1-37

 







When parking brake switch (1) is turned ON, the parking brake
is applied, lighting parking brake indicator (2). When releasing
the parking brake, turn the switch OFF.
NOTE: • The parking brake is released by hydraulic pressure
only when the engine is running.
• To ensure safe operation, when the parking brake is
applied, even though the forward/reverse selector
lever is moved to forward (F) or reverse (R) position,
the machine does not travel.
• To ensure safe operation, when the engine is
stopped, the parking brake is applied even if parking
brake switch (1) is in the OFF position. Before starting
the engine, check that the forward/reverse selector
lever and forward/reverse selector switch (3) are in
the OFF position. Then, turn the parking brake switch
(1) ON.
M4GB-01-046
M4GB-01-154
M4GB-01-050


M4GF-01-001


