7-6
The maintenance guide table is affixed to the reverse side of
the tool box cover. Lubricate and/or service the parts at the
intervals as instructed in the table so that all necessary mainte-
nance can be performed regularly.
•
Symbol Marks
The following marks are used in the maintenance guide
table.
Grease
(Front Joint Pin, Cylinder Pin, Propeller
Shaft)
Hydraulic Oil
Engine Oil
Hydraulic Oil Filter
(Pilot Filter, Hydraulic Oil Tank Filter,
Suction Filter)
Engine Oil Filter
Gear Oil
(Final Drive, Differential Gear)
Coolant
(Long-Life Coolant)
Fuel
Transmission Oil
(Transmission, Torque Converter)
Fuel Filter
(Fuel Filter, Fuel Pre-Filter)
Transmission Oil Filter
To Next Page
Loading...
