Hitachi ZW310 - Change Axle Oil


7-36
M4GB-07-035
M4GB-07-036
M4GB-07-037
M4GB-07-038
Front Axle
Rear Axle
Front Axle
Rear Axle





 
 





 

 



1. Park the machine on a solid level surface. Lower the
bucket to the ground. Stop the engine.
2. Clean the vicinity around drain plug (1) and the oil drain
plug hole.
3. Arrange a container of 50 liters capacity to receive the
drain oil.
4. Remove drain plug (1) to drain the oil.
5. Securely tighten drain plug (1).
6. Refill the specified amount of oil through oil level plug (2)
hole.
Front Rear
ZW180 28 liters 28 liters
ZW220 32 liters 32 liters
ZW250 40 liters 40 liters
ZW310 48 liters 48 liters
      




5
