S-27
•
If a fire breaks out, evacuate the machine in the following
way:
• Stop the engine by turning the key switch to the OFF po-
sition if there is time.
• Use a fire extinguisher if there is time.
• Exit the machine.
518-E01A-0393
•
Prevent asphyxiation. Engine exhaust fumes can cause sick-
ness or death.
• If you must operate in a building, be sure there is ad-
equate ventilation. Either use an exhaust pipe extension
to remove the exhaust fumes or open doors and windows
to bring enough outside air into the area.
509-E01A-0016
•
Welding may generate gas and/or small fires.
• Be sure to perform welding in a well ventilated and pre
-
pared area. Store flammable objects in a safe place before
starting welding.
• Only qualified personnel should perform welding.
Never allow an unqualified person to perform welding.
•
Grinding on the machine may create fire hazards. Store
flammable objects in a safe place before starting grinding.
•
After finishing welding and grinding, recheck that there are
no abnormalities such as the area surrounding the welded
area still smoldering.
523-E01A-0818
SA-393
SA-016
SA-818
To Next Page
Loading...
