Hitachi ZW310 - Inspection; Maintenance Side Access Cover


1-84

 
 

    



 

   

 

Raise latch (3) to your side to open side cover (1). To open side
cover (4), open side cover (1) and move down open/close lever
(5) on the rear side of the base machine.
NOTE: When required to inspect the machine for a long time
with side cover (1) kept open, lock the side cover in posi
-
tion with locking rod (6) provided inside the side cover.
M4GB-01-141
M4GB-01-142
M4GB-01-143
 



