7-20
Application
Manufacturer
Transmission
Engine Oil or Gear Oil (API CD Class)
–25°C
Idemitsu Kosan APOLLOIL MOTIVE S310
Shell Rimula X 10W
Mobil Delvac Hydraulic 10W
Texaco Delo 300 10W
Esso Essolube Hydraulic 10W
NOTE: • The machine shipped from the factory is filled with lubricants marked with
.
• When the atomspheric temperature is below –25°C: Contact your authorized dealer.
Kind of Oil Gear Oil
Application
Manufacturer
Axle
Shell Spirax A 90LS
Cosmo Hi-gear oil SP90TS
Mobil Mobil Lube LS 85W-90
NOTE: The machine shipped from the factory is filled with lubricants marked with
.
Kind of Lubricant Hydraulic Oil
Where to be applied Hydraulic System
Change
Interval
Manufacturer
4000 hours 2500 hours 1500 hours
Hitachi
Super EX 46HN
Idemitsu Kosan Super Hydro 46 WRHU
British Petroleum Bartran HV46
Caltex Oil
Rando Oil
HD46
Texaco INC. Rando Oil
Chevron U.S.A INC. Chevron AW46
Esso NUTO H46
Mobil Oil DTE 25
Shell Oil Tellus Oil S46 Tellus Oil 46
Remarks Anti-wear type hydraulic oil
NOTE: Use proper hydraulic oil in accordance with the atmosheric temperature.
The machine shipped from the factory is filled with lubricants marked with
.
When the atmospheric temperature is between –40°C and +20°C: Use the proper hydraulic oil having high and low
temperture characteristics by referring to the values shown below.
Low Temerture Viscosity: Less than 400cSt at –40°C
High Temerture Viscosity: More than 6.5cSt at +80°C
The above values are approximately equivalent to ISO viscosity grade #22. However, low temperature viscosity will
differ depending on each product. Contact each hydraulic oil manufacture directly.
When the atomspheric temperature is below –40°C: Contact your authorized dealer.
To Next Page
Loading...
