Honeywell 2MLF-AV8A User Manual

`4. Operating Procedures and Monitoring
4.2. Run parameters setting
R200 Analog Input Module 2MLF-AV8A, AC8A User's Guide 59
September 2010 Honeywell
Step Action
Average processing: This field is active only when the average process is
enabled. You can select average processing as time average or count
average.
Average value: This field is active only when the average process setting is
enabled. Double-click the average value to input the value. The available
range is 2 ~ 64000 for count average, and 4 ~ 16000 for time average.
Select all channels to change parameters.
a) Select the check box in the parameters item in order to change the
parameters of all channels to identical setting value.
b) Change the parameters of any one channel to change the parameters of
the all channels at a time.

Honeywell 2MLF-AV8A Specifications

General

Brand	Honeywell
Model	2MLF-AV8A
Category	I/O Systems
Language	English