Honeywell 2MLF-AV8A - Page 62

4. Operating Procedures and Monitoring
4.3. Special module monitoring
62 Analog Input Module 2MLF-AV8A, AC8A User's Guide R200
Honeywell September 2010
Step Action
The four buttons available are:
• Reset max./min value
• Start Monitoring
• Test
• Close
The current value of A/D conversion output and maximum/minimum value are
displayed in upper-half of the monitoring window. Parameter settings for each
selected channel are displayed in the lower-half of the monitoring window.
5
Click Start Monitoring to display the current values A/D conversion output of
all channels.