Honeywell IntelliDoX

INTELLIDOX DOCKING MODULE USER MANUAL || PREPARE MODULES FOR USE
HONEYWELL PAGE 33 OF 119
Managing Network Settings through an Internet Browser
You can change network settings and the administrative password for networked modules
through an internet browser. To improve performance, Honeywell recommends that you assign
a static IP address to each networked module. To improve security, Honeywell recommends
that you change the password for each networked module.
Default User Name and Password for Internet Browser Access
The user name and password are case sensitive. Honeywell recommends that you change the
password for each networked module.
• The default user name is admin.
• The default password is admin.
Changing Network Settings and Password through an Internet Browser
Window
1. When the module is successfully connected to a network, display the About summary
screen, and then record the IP address for the module. To display the About summary
screen, follow these steps:
a) Press and hold until the Adjust docking station settings menu is displayed.
b) Press or to scroll to About, and then press to display the About screen.
2. From a networked computer, open an internet browser window. In the address bar of the
internet browser window, type http:// followed by the IP address of the module. The
IntelliDoX Login webpage is displayed in the browser window.