Honeywell N4680 - Straight 2 of 5 IATA Redundancy; Matrix 2 of 5; Matrix 2 of 5 On;Off

N4680 2D Decoded Scan Engine User Guide 101
Straight 2 of 5 IATA Redundancy
If you are encountering errors when reading Straight 2 of 5 IATA bar codes, you may
want to adjust the redundancy count. Redundancy adjusts the number of times a
bar code is decoded before transmission, which may reduce the number of errors.
Note that the higher the redundancy count, the longer it will take to decode the bar
code. To adjust the redundancy, scan the Straight 2 of 5 IATA Redundancy bar code
below, then scan a redundancy count between 0 and 10 on the Programming
Chart. Then scan the Save bar code. Default = 0.
Matrix 2 of 5
<Default All Matrix 2 of 5 Settings>
Matrix 2 of 5 On/Off
Maximum Message Length
Straight 2 of 5 IATA
Redundancy
On
* Off