Honeywell N4680 - Show Software Revision; Show Data Format; Test Menu; Totalfreedom

176 N4680 2D Decoded Scan Engine User Guide
Show Software Revision
Scan the bar code below to output the current software revision, unit serial number,
and other product information for both the scan engine and base.
Show Data Format
Scan the bar code below to show current data format settings.
Test Menu
When you scan the Test Menu On code, then scan a programming code in this
manual, the scan engine displays the content of a programming code. The pro-
gramming function will still occur, but in addition, the content of that program-
ming code is output to the terminal.
Note: This feature should not be used during normal scan engine operation.
TotalFreedom
TotalFreedom is an open system architecture that makes it possible for you create
applications that reside on your scan engine. Decoding apps and Data Formatting
apps can be created using TotalFreedom. For further information about TotalFree-
dom, go to our website at www.honeywellaidc.com.
Show Software Revision
Data Format Settings
DFMBK3?.
On
* Off