178 N4680 2D Decoded Scan Engine User Guide
EZConfig-Scanning Operations
The EZConfig-Scanning software performs the following operations:
Scan Data
Scan Data allows you to scan bar codes and display the bar code data in a window.
Scan Data lets you send serial commands to the scan engine and receive a scan
engine response that can be seen in the Scan Data window. The data displayed in
the Scan Data window can either be saved in a file or printed.
Configure
Configure displays the programming and configuration data of the scan engine.
The scan engine's programming and configuration data is grouped into different
categories. Each category is displayed as a tree item under the "Configure" tree
node in the application explorer. When one of these tree nodes is clicked, the right-
hand side is loaded with the parameters' form belonging to that particular cate-
gory. The "Configure" tree option has all the programming and configuration
parameters specified for a scan engine. You can set or modify these parameters as
required. You can later write the modified settings to the scan engine, or save them
to a dcf file.
Imaging
Imaging provides all the image-related functions that a 2D scan engine can per-
form. You can capture an image using the current settings, and the image will be
displayed in an image window. Images captured from the scan engine can be saved
to files in different image formats. You can modify the image settings and save the
image settings to an INI file, which can be loaded later to capture new images.
Imaging also lets you preview the images continuously captured by the scan
engine.
Installing EZConfig-Scanning from the Web
Note: EZConfig-Scanning requires .NET software. If .NET is not installed on your PC, you
will be prompted to install it during the EZConfig-Scanning installation.
1. Access the Honeywell web site at www.honeywellaidc.com
2. Click on the Resources tab. Select Download.
3. Click on the dropdown for Select Product Number. Click on your product
number.
4. Click on the listing for EZConfig-Scanning.
5. When prompted, select Save File, and save the files to the c:\windows\temp
directory.
6. Once you have finished downloading the file, exit the web site.
To Next Page
Loading...
