102 N4680 2D Decoded Scan Engine User Guide
Matrix 2 of 5 Message Length
Scan the bar codes below to change the message length. Refer to Message Length
Description (page 86) for additional information. Minimum and Maximum lengths
= 1-80. Minimum Default = 4, Maximum Default = 80.
Matrix 2 of 5 Redundancy
If you are encountering errors when reading Matrix 2 of 5 bar codes, you may want
to adjust the redundancy count. Redundancy adjusts the number of times a bar
code is decoded before transmission, which may reduce the number of errors. Note
that the higher the redundancy count, the longer it will take to decode the bar code.
To adjust the redundancy, scan the Matrix 2 of 5 Redundancy bar code below, then
scan a redundancy count between 0 and 10 on the Programming Chart. Then scan
the Save bar code. Default = 0.
Code 11
<Default All Code 11 Settings>
Code 11 On/Off
To Next Page
Loading...
