Honeywell N4680 - Grid Matrix Message Length; Maxicode; Maxicode On;Off; Maxicode Message Format

144 N4680 2D Decoded Scan Engine User Guide
Grid Matrix Message Length
Scan the bar codes below to change the message length. Refer to Message Length
Description (page 86) for additional information. Minimum and Maximum lengths
= 1-2751. Minimum Default = 1, Maximum Default = 2751.
MaxiCode
< Default All MaxiCode Settings >
MaxiCode On/Off
MaxiCode Message Format
Use this setting to specify whether the secondary message of a MaxiCode bar code
is decoded or not. Default = Primary Required, Secondary if Available.
Minimum Message Length
Maximum Message Length
On
* Off
Primary Message Only
*Primary Required, Secondary
if Available