Honeywell N4680 - Page 210

190 N4680 2D Decoded Scan Engine User Guide
*8 Data, 1 Stop, Parity None 232WRD2 23
8 Data, 1 Stop, Parity Odd 232WRD8 24
8 Data, 1 Stop, Parity Mark 24
RS232 Receiver Time-out Range 0 - 300 seconds 232LPT### 24
RS232 Handshaking *RTS/CTS Off 232CTS0 25
Flow Control, No Timeout 232CTS1 24
Two-Direction Flow Control 232CTS2 25
Flow Control with Timeout 232CTS3 25
RS232 Timeout 232DEL#### 25
*XON/XOFF Off 232XON0 25
XON/XOFF On 232XON1 25
*ACK/NAK Off 232ACK0 26
ACK/NAK On 232ACK1 26
RS232 Stop Mode RS232 Stop Mode On 232SDY 26
Input/Output Selections
Power Up Beeper Power Up Beeper Off - Scanner BEPPWR0 27
*Power Up Beeper On - Scanner BEPPWR1 27
Beep on BEL Character Beep on BEL On BELBEP1 27
*Beep on BEL Off BELBEP0 27
Trigger Click On BEPTRG1 28
*Off BEPTRG0 28
Beeper - Good Read Off BEPBEP0 28
*On BEPBEP1 28
Beeper Volume - Good Read Off BEPLVL0 28
Low BEPLVL1 28
Medium BEPLVL2 28
*High BEPLVL3 28
Beeper Pitch - Good Read (Frequency) Low (1600) (min 400Hz) BEPFQ11600 29
*Medium 2700) BEPFQ12700 29
High (4200) (max 9000Hz) BEPFQ14200 29
Beeper Pitch - Error (Frequency) *Razz (250) (min 200Hz) BEPFQ2800 29
Medium (3250) BEPFQ23250 29
High (4200) (max 9000Hz) BEPFQ24200 29
Beeper Duration - Good Read *Normal Beep BEPBIP0 30
Short Beep BEPBIP1 30
LED - Good Read Off BEPLED0 30
*On BEPLED1 30
Selection
Setting
* Indicates default
Serial Command
# Indicates a
numeric entry
Page