18 NFS2-3030 Programming Manual — P/N 52545:A 11/29/2005
Main Menu Read Status
2.4 Read Status
Pressing the Read Status soft key brings up screens to view the present status of points, zones, and other
system information. Refer to this panel’s operations manual for a full description of Read Status.
2.5 Program/Alter Status
Pressing the Program/Alter Status soft key brings up screens for panel programming, point
programming, autoprogramming, clear programming, altering the status of points, walk test, and
other information. Refer to Sections 3, and 4 for a full description of Program/Alter Status.
2.6 Printer Functions
Pressing the Printer Functions soft key brings up screens to print reports. Refer to this panel’s
operations manual for a description of Printer Functions. This key will appear only if a printer
operation has been selected. Refer to “Supervision” on page 32 for selection information.
To Next Page
Loading...
