MAINTENANCE
Honeywell !!K$!!Rh.
4.
B. AT-222 Radio Altimeter Antenna (See Figure 4-3 and Table 4-2.)
One AT-222 antenna
is used to receive information from the RT-300 and
another is used to transmit information to the RT-300.
)
1
I
4
AO-14n5 @
AT-222 Radio Altimeter Antenna
Figure 4-3
Dimensions (maximum):
Width (along contoured mounting surface) .... 7.00 in. (177.81Mn)
Height
......................................
2.75 in. (69.85 mm)
Weight (maximum) .................................
1.25 lb (0.57 kg)
Power Requirements .
● .............................
100 W average max
Mating Connector:
J1
...................................................
TNC - male
GRFF 4007-0002 (Straight)
GRFF 4100-0001 (Right Angle)
Mounting
..........................................
Flush mounted to
aircraft skin
AT-222 Radio Altimeter Antenna
Leading Particulars
Table 4-2
22-14-00
Page 144
Aug 15/91
Use or disclosure of information on this page is subject to the restrictions on the title page of this document.