Honeywell SPZ-8000 - Autothrottle Performance Limits

Mode
Control or Sensor
Parameter Value
SPEED DADC
Mach Engage Range 0.4 to 0.88 M
(IAS/MACH)
Mach Hold Error
tool M
IAS Engage Range
80 to 340 kts (CAS)
IAS Hold Error
25 kts
Throttle Control 2“ to 39.5° PLA
Authority
Throttle Rate Limit
f7° pLA/SECOND
FLCH
EPR EPR Control Range 0.85to 2.0 EPR
CLIMB
EPR Hold Error
~().olEpR
Throttle Control
2° to39.5 PLA
Authority
Throttle Rate Limit
~7” pLA/SECOND
FLCH PLA PLA Setting
2° PLA
DESCENT
(Power Lever Angle)
TAKEOFF EPR EPR Control Range
0.85 to 2.0 EPR
(TO)
EPR Hold Error
~().ol EpR
Throttle Control
2° to 39.5” PLA
Authority
Throttle Rate Limit
~lo” pLA/SECOND
GO-AROUND
EPR EPR Control Range 0.85to 2.0 EPR
(GA)
EPR Hold Error
~oool” EpR
Throttle Control
2° to39.5 PLA
Authority
Throttle Rate Limit
f7° pLA/SECOND
Autothrottle Performance Limits
Table 208
22-14-00
Page 298:177
Aug 15/91
Use or disclosure of information on this page is subpt to the restridions on the title page of fhis document.