Honeywell SPZ-8000 - Stored Flight Plan Data

Honeywell !!!$!!~.c’
The following are calculated and/or displayed for the active
flight plan under the WHAT-IF conditions:
. Cruise altitude and ceiling altitude
● Step increment
. ETE to destination for active and WHAT-IF flight plans
● Fuel required to destination for active and WHAT-IF flight
plans
● Optimum altitude
● Step altitude (based on initialized step altitude increment)
. Command speed
● ETE and ETA to step climb point
. Command EPR setting
. DTG for step point
. Range to reserve
. Time to reserve
. Current fuel remaining
. Cruise pages under WHAT-IF conditions
4. C. (1) (k) Stored Flight Plan Data
Performance data can be calculated for a stored flight plan.
The performance initialization inputs may be changed to reflect
the expected conditions for the flight. The default
initialization values are the currently active values except
for fuel weight.
The following is calculated and/or displayed
for the stored flight plan:
. Cruise altitude and ceiling altitude
● Step increment
. Time to destination
● Fuel required to destination
22-14-00
Page 298.171
Aug 15/91
Use or disclosure of Information on this page is subject to the restrictions on the title page of this document.