EasyManua.ls Logo

Honeywell SPZ-8000 - Advisory (Blue) Messages; Caution (Amber) Messages

Honeywell SPZ-8000
681 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2. F.
(2) (b) Caution (Amber) Messages -
The available amber messages are
listed in Table 203. When an amber message becomes active the
following indications are given:
. amber message displayed flashing on the CAS display
. amber message aural alert is sounded
c amber annunciator on the master warn panel is lit
When the amber annunciator/pushbutton is selected on the master
warning panel, the amber annunciator is extinguished and the
amber message is displayed steady on the CAS display. Although
the red annunciator is not lit, selection of the red pushbutton
acknowledges amber messages also.
If there are amber messages already on the CAS display when a
new amber message becomes active, the new message is put at the
top of the amber message stack. If the existing amber or blue
messages are scrolled off the display, the amber and blue
message stacks are brought back on the CAS display with the new
message displayed at the top of the amber stack. Acknowledged
messages are removed from the CAS display when the condition
causing the message is remedied.
(c) Advisory (Blue) Messages
- The available blue messages are
listed in Table 204.
When a blue message becomes active the
following indications are given:
. blue message displayed flashing on the CAS display
. blue message aural alert is sounded
The blue message appears flashing on the CAS display for
5 seconds after which time the message is displayed steady.
No pilot interaction is required to acknowledge this type of
message.
If there are blue messages already on the CAS display when a
new blue message becomes active, the new message is displayed
at the top of the blue message stack.
If the
existing amber or
blue messages are scrolled
off the display, the blue message
stacks are brought back on the CAS display with the new message
displayed at the top of the stack. Blue messages are removed
from the CAS display when the condition causing the message is
remedied.
22-14-00
Page 282
Aug 15/91
Use or dtxlosure of mformatlon on thts page IS subpcf to the restncttons on the Mie page of fhts document.

Table of Contents

Other manuals for Honeywell SPZ-8000

Related product manuals