Honeywell !!%!!~.c’
4. D.
(5)
(b) Cruise Phase
Cruise speed rules:
● Rule 1
- All constraint speeds are honored.
Q Rule 2
- When a constrained waypoint is sequenced, the
active target speed is latched to the constraint speed.
. Rule 3
- Entering DELETE on line lR of the active flight
plan page (CMD SPD) will delete the latched target speed and
return the target speed to the initial cruise speed
schedule.
. Rule4 -
Cruise speeds can be changed at any time. The
active target speed will not change to a new cruise speed
schedule if the current target speed is latched to a
constraint speed.
Figure 273 shows the cruise phase of the flight. The following
paragraphs refer to the circled numbers shown.
6363
@
TOC
A
‘WPT 4
AD-3081 8#
Cruise Phase
Figure 273
22-14-00
Page 298;220
Aug 15/91
Use or disclosure of information on this page is subject to the restrictions on the title page of this document,
To Next Page
Loading...
