Honeywell SPZ-8000 - DFZ-820 Dual Flight Guidance System; System Performance;Operating

3. DFZ-820 Dual Fliaht Guidance Svstem
A. System Performance/Operating
Limits
The system performance/operating limits
for the System are presented in
Table 205. All limits have a tolerance of f10 percent.
Mode Control or Sensor
Parameter Value
A/P
A/P Engage
Basic A/P
TCS Switch
Turn Knob
Pitch Wheel
Electric
Pitch Trim
Heading
GP-820
Select
Heading Knob
and HDG SEL
Button
VOR/VORAPP
GP-820
LNAV Button,
CRS Knob, and
NAV Receiver
Engage Limit
Roll Angle Limit
Pitch Angle Limit
Roll Angle Limit
Roll Rate Limit
Pitch Angle Limit
Pitch “g”
Command Limit
Up Trim Limit
Down Trim Limit
Roll Angle Limit
Roll Rate Limit
VOR/VOR APP Capture:
Beam Intercept
Angle (HDG SEL)
Lateral Beam
Sensor (LBS)
Capture Point
Rol1: Up to *75 deg
Pitch: Up to t50 deg
Up to t35 deg max
t6 deg
min
20 deg
up, 15 deg down
*3O deg Roll
*5.5 deg/sec
20 deg up, 15 deg down
+o.2g; -0.1 g
20.52 0.5deg
6.()~
().sdeg
~za deg
120
deg low bank
switched on GP-820
4.0 deg/sec
2 deg/sec low bank
Up to t90 deg
Function of Beam
Error, Beam
Closure Rate,
and Course Error
Min Trip Point,
*20 mv dc
Max Trip Point,
~180 mv dc
System Performance/Operating Limits
Table 205
22-14-00
Page 298.37
Aug 15/91
Use or disclosure of information on this page is subject to the restrictions on the title page of this document.