Honeywell !!!!!!!by’
Selection of a short range NAV source (NAV, ILS, or MLS) brings
up the
CRS SET window adjacent to the NAV 1/2 selection. The
window is initialized to O degrees.
The window comes up shaded
(inverse
video) and boxed.
The pilot can then change the
course of the previewed source through the DC parameter set
knob. The line key adjacent the CRS SET window has no
function. This window is
only shown (activated) when a short
range NAV is being previewed. If the previewed source is an
FMS, desired track is automatically set by the FMS and the CRS
SET window is removed from the preview menu.
The RETURN key brings
up the main NAV menu. The preview
selection, on the main NAV menu, is boxed if a NAV source is
selected for display on the submenu. To clear a PREVIEW
problem, all sources on the submenu must be deselected.
6. C.
(7) SENSOR Mode
The SENSOR mode function is used to change the normal display sensor
configuration in the event of failure conditions.
The SENSOR
menu
is
shown in Figure 6-15.
(a) SENSOR Function Key Selection - Selection of the SENSOR mode
causes the function key to be annunciated along with the SENSOR
menu to be displayed on the DC CRT (Figure 6-15). The SENSOR
mode menu is used to select the active sensors displayed on the
PFD and ND.
A SENSOR function key selection has no effect on
any of the display formats.
SENSOR source selections are made
using the menu driven line select keys.
(b) Sensor Source Selections -
The following source selection
effect the on-side displays only:
. Inertial Reference System (IRS) 1, 2, or 3 (Option)
. Digital Air Data Computer (DADC) 1 or 2
. Radio Altimeter (RADALT) 1 or 2
The following selections are controlled by either side display
controller:
. Flight Guidance Computer (FGG) 1 or 2
● Data Acquisition Unit (DAU) 1 channel A or B
. Data Acquisition Unit (DAU) 2 channel A or B
. Fault Warning Computer (FWC) 1 or 2
. Autothrottle Computer (A/T) 1 or 2
22-14-00
Page 184
Aug 15/91
Use or disclosure of information on this page is subject to the restrictions on the title page of this document.