Honeywell SPZ-8000 - Navaid Declutter Mode; Airport Declutter Mode

MAINTENANCE
Honeywell !!!W!4A&.
6. C. (3) (d) Navaid Declutter Mode - The selection for
displayed on theDC CRT as ID NAVAID.
Th
independent modes as described:
ID NAVAID -
EEl-
this mode is
s selection has three
This is the Dower-uD mode for this Darameter.
With both the ID
and NAVAID unboxed; the
active flight plan navaids and IDs are not
displayed on the MAP display format.
This is the next selection of the line key.
With the box surrounding the entire mode, the
active flight plan navaids and IDs are
displayed on the MAP display format.
ID NAVAID -
This is the next selection of the line key.
With the box surrounding only the NAVAID
label, the active flight plan navaids are
cll~~~:yedwithout IDs on the MAP display
.
(e) Airport Declutter Mode -
The selection for this mode is
displayed on the DC CRT as ID AIRPT. This selection has three
independent
modes as described:
ID AIRPT
- This is the power-up mode
for this parameter.
With both the
ID and AIRPT unboxed, the
active flight plan airports and IDs are not
displayed on the MAP display format.
I.w!Y_l
- This is the next selection of the line key.
With the box surrounding the entire mode, the
active flight plan airports and IDs are
displayed on the MAP display format.
u
ID AIRPT - This is the next selection of the line key.
With the box surrounding only the AIRPT
label, the active flight plan airports are
$:~~~:yed without IDs on the MAP display
.
22-14-00
Page 177
Aug 15/91
Use or disclosure of information on this page is subject to the restriaions on the title page of this document.