. . m.
MAINTENANCE
s
Q
T
R
CLR
ELECTRONIC SWITCH (FILP-FLOP) CHARACTERISTICS
1. AN OUTPUT IS ALWAYS PRESENT AT EITHER Q OR 6 (BISTABLE).
2. CLEAR (CLR) IS CONTINOUS INPUT AND WILL CAUSE OUTPUT TO SWITCH TO 6.
3. RESET (R) IS PULSED INPUT AND ALWAYS CAUSES OUTPUT TO SWITCH TO 6.
4. SET (S) IS PULSED INPUT AND ALWAYS CAUSES OUTPUT TO SWITCH TO Q.
5. TOGGLE (T) IS MOMENTARY INPUT AND CAUSES OUTPUT TO SWITCH TO Q OR 6 SUCCESSIVELY
AC-3452E@
Logic Truth Table
Table A
22-14-00
Page INTRO-n/INTRO-12
Apr 15/93
Use or disclosure of information on this page is subject to the restrictions on the title page of this document.
To Next Page
Loading...
