Honeywell $%!!!.”
VdPT 8
AD-30619#
Descent Phase
Figure 274
At point @ the top of descent (TOD) has been reached and the
aircraft begins its descent.
The target speed automatical1y
changes to the descent speed of 0.80 M.
At point ~ there is no change to the current target speed
(refer to rule 1).
At
point @ the target speed changes to 0.78 M to allow the
aircraft to decelerate into WPT 7.
At point ~ the current speed target is now latched to
0.78 M, but switches over to 300 KCAS when reaching the
0.78 M/300 crossover altitude.
At point ~ deleting the SPD CMD on the active flight plan
page returns the target speed back to the descent speed
schedule of 300/0.80.
22-14-00
Page 298.222
Aug 15/91
Use or disclosure of information on this page is subject to the restrictions on the title page of this document.