Honeywell XNX Technical Manual

XNX Universal Transmitter
Section 5 - Warnings/Faults
125
Number Description Contents of Data Field
I048
Alarm 2 Recongured for Increasing
Concentrations
N/A
I049
Alarm 2 Recongured for Depleting
Concentrations
N/A
I050
Alarm 1 Value Changed fAlarmThres[0]
I051
Alarm 2 Value Changed fAlarmThres[1]
I052
Clock Set N/A
I053
Date Format Changed iDateFormat
I054
Sensor Boots N/A
I055
Unused
I056
Sensor RTC Adjusted Error in seconds or +/-999 if large
I057
Fault Set Latching
I058
Fault Set Non-Latching
I059
LCD Heater On
I060
LCD Heater Off
I061
Personality Power Up Sensor type
I062
Option Power Up Option type
I063
Loaded Same Cell
I064
Loaded Changed Cell
I065
Loaded Changed Gas
I066
Option Type Changed
I067
HART
®
Address Changed
I068
HART Mode Changed

Honeywell XNX Specifications

General

Ingress Protection	IP66/67
Product Type	Universal Transmitter
Enclosure Rating	IP66/67
Display	LCD
Communication Protocols	HART, Modbus, Foundation Fieldbus
Power Supply	24 VDC nominal, 18-32 VDC
Operating Temperature	-40°C to +65°C (-40°F to +149°F)
Material	Aluminum or Stainless Steel
Gas Types	Toxic, Oxygen, and Combustible gases
Output	4-20 mA
Relays	3 programmable relays
Approvals	ATEX, IECEx, UL, CSA
Sensor Compatibility	Electrochemical, catalytic, infrared, and other sensor types