HP 830

109
Field Descri
p
tion
Auto-negotiation enabled Indicates whether auto-negotiation is enabled on the port.
OperMau Speed and duplex state on the port.
Power port class
PoE device type:
• PSE—Power sourcing equipment.
• PD—Powered device.
PSE power supported Indicates whether the device can operate as a PSE.
PSE power enabled Indicates whether the device is operating as a PSE.
PSE pairs control ability Indicates whether the pair selection ability is available.
Power pairs
Power supply mode:
• Signal—Uses data pairs to supply power.
• Spare—Uses spare pairs to supply power.
Port power classification
Port power classification of the PD:
• Class 0.
• Class 1.
• Class 2.
• Class 3.
• Class 4.
Link aggregation supported Indicates whether link aggregation is supported.
Link aggregation enabled Indicates whether link aggregation is enabled.
Aggregation port ID Aggregation group ID, which is 0 when link aggregation is disabled.
Location format
Location information format:
• Invalid—The format of the location information is invalid.
• Coordinate-based LCI—The location information is
coordinate-based.
• Civic Address LCI—Typical address information.
• ECS ELIN—Telephone for urgencies.
PoE PSE power source
PSE power type:
• Unknown—Unknown power supply.
• Primary—Primary power supply.
• Backup—Backup power supply.
PoE PD power source
PD power type:
• Unknown—Unknown power supply.
• PSE—PSE power supply.
• Local—Local power supply.
• PSE and local—PSE and local power supplies.
Port PSE Priority
PoE power supply priority of PSE ports:
• Unknown.
• Critical.
• High.
• Low.