HP 830 User Manual

100
LLDP configuration commands
display lldp local-information
Use display lldp local-information to display the LLDP information to be sent. This information, contained
in the LLDP TLVs, is sent to neighbor devices.
Syntax
display lldp local-information [ global | interface interface-type interface-number ] [ | { begin | exclude
| include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
global: Displays the global LLDP information to be sent.
interface interface-type interface-number: Specifies a port by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no keyword or argument is specified, this command displays all LLDP information to be sent, including
the following information:
• The global LLDP information.
• The LLDP information about the LLDP-enabled ports in up state.
Examples
# Display all LLDP information to be sent.
<Sysname> display lldp local-information
Global LLDP local-information:
Chassis ID : 000f-1123-0e11
System name : HP
System description : HP Comware Platform Software HP 870. Product Version Rele
ase 2607P19 Copyright (c) 2010-2014 Hewlett-Packard Development Company, L.P.
System capabilities supported : Bridge,Router
System capabilities enabled : Bridge,Router

HP 830 Specifications

General

Manageable	Yes
Ports	24 x 10/100/1000 ports, 4 x SFP ports
Power Supply	Internal power supply
Operating Temperature	32°F to 113°F (0°C to 45°C)
Dimensions	17.32 x 10.24 x 1.72 in (44 x 26 x 4.37 cm)