HP 830

76
The bridge-aggregation keyword is available only when Layer 2 aggregate interfaces exist on the
device.
Examples
# Display detailed information about Layer 2 aggregation group 1, which is a static aggregation group.
<Sysname> display link-aggregation verbose bridge-aggregation 1
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Port Status: S -- Selected, U -- Unselected
Aggregation Interface: Bridge-Aggregation1
Aggregation Mode: Static
Loadsharing Type: Shar
Port Status Priority Oper-Key
--------------------------------------------------------------------------------
XGE1/0/1 S 32768 1
XGE1/0/2 S 32768 1
Table 18 Command output
Field Descri
p
tion
Loadsharing Type
Load sharing type:
• Shar—Load sharing.
• NonS—Non-load sharing.
Port Status
Port state:
• S—Selected.
• U—Unselected.
Aggregation Interface Name of the aggregate interface.
Port Port type and number.
Status Port state: Selected or Unselected.
Priority Port aggregation priority.
Oper-Key Operational key.
enable snmp trap updown
Use enable snmp trap updown to enable linkUp/linkDown trap generation for an aggregate interface.
Use undo enable snmp trap updown to disable linkUp/linkDown trap generation for an aggregate
interface.
Syntax
enable snmp trap updown
undo enable snmp trap updown
Default
LinkUp/linkDown trap generation is enabled for an aggregate interface.
Views
Layer 2 aggregate interface view