HP 830 User Manual

73
Field Descri
p
tion
Bridge-Aggregation1
Load-Sharing Mode
Link-aggregation load sharing mode of Layer 2 aggregation group 1.
• By default, this field displays the global link-aggregation load sharing
modes.
• If you have configured a link-aggregation load sharing mode
specifically for this aggregation group, this field displays the
configured mode.
Layer 2 traffic: destination-mac
address, source-mac address
Default link-aggregation load sharing mode for Layer 2 traffic. In this
sample output, Layer 2 traffic is load shared based on source and
destination MAC addresses.
display link-aggregation member-port
Use display link-aggregation member-port to display detailed link aggregation information for the
specified member ports. If you do not specify a port, the command displays detailed link aggregation
information for all member ports.
Syntax
display link-aggregation member-port [ interface-list ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-list: Specifies a list of ports in the format interface-type interface-number1 [ to interface-type
interface-number2 ]. interface-type interface-number specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
A static link aggregation group is not aware of the partner's information. As a result, only the port
number and operational key of a member port in a static aggregation group are displayed.
Examples
# Display detailed link aggregation information for Ten-GigabitEthernet 1/0/1, a member port of a
static aggregation group.
<Sysname> display link-aggregation member-port Ten-GigabitEthernet 1/0/1
Ten-GigabitEthernet1/0/1:
Aggregation Interface: Bridge-Aggregation1
Port Number: 1

HP 830 Specifications

General

Manageable	Yes
Ports	24 x 10/100/1000 ports, 4 x SFP ports
Power Supply	Internal power supply
Operating Temperature	32°F to 113°F (0°C to 45°C)
Dimensions	17.32 x 10.24 x 1.72 in (44 x 26 x 4.37 cm)