HP 830 User Manual

106
display lldp neighbor-information
Use display lldp neighbor-information to display the LLDP information carried in LLDP TLVs sent from the
neighboring devices.
Syntax
display lldp neighbor-information [ brief | interface interface-type interface-number [ brief ] | list
[ system-name system-name ] ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
brief: Displays the brief of LLDP information sent from the neighboring devices. If this keyword is not
specified, this command displays detailed LLDP information sent from the neighboring devices.
interface interface-type interface-number: Specifies a port by its type and number. If this option is not
specified, this command displays the LLDP information that all ports receive from the neighboring
devices.
list: Displays the LLDP information sent from the neighboring devices in the form of a list.
system-name system-name: Displays the LLDP information sent from a neighboring device specified by its
system name. The system-name argument is a character string of 1 to 255 characters. If this option is not
specified, this command displays the LLDP information sent from all neighboring devices in a list.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the LLDP information sent from the neighboring devices received through all ports.
<Sysname> display lldp neighbor-information
LLDP neighbor-information of port 2[Ten-GigabitEthernet1/0/1]:
Neighbor index : 1
Update time : 0 days,7 hours,14 minutes,43 seconds
Chassis type : MAC address
Chassis ID : 00e0-fc00-5800
Port ID type : Interface name
Port ID : Ten-GigabitEthernet1/0/29
Port description : Ten-GigabitEthernet1/0/29 Interface
System name : HP
System description : HP Comware Platform Software, Software Version 5.20.105,
Release 2607P18 HP 870 LSW Copyright (c) 2010-2014 Hewlett-Packard Development C

HP 830 Specifications

General

Manageable	Yes
Ports	24 x 10/100/1000 ports, 4 x SFP ports
Power Supply	Internal power supply
Operating Temperature	32°F to 113°F (0°C to 45°C)
Dimensions	17.32 x 10.24 x 1.72 in (44 x 26 x 4.37 cm)