HP 830 User Manual

94
<Sysname> system-view
[Sysname] interface Vlan-interface 1
[Sysname-Vlan-interface1] pppoe-server bind virtual-template 1
pppoe-server log-information off
Use pppoe-server log-information off to disable PPP log displaying on a device operating as a PPPoE
server.
Use undo pppoe-server log-information off to restore the default.
Syntax
pppoe-server log-information off
undo pppoe-server log-information off
Default
PPP log displaying is enabled on a PPPoE server.
Views
System view
Default command level
2: System level
Usage guidelines
With PPP log displaying enabled, large amounts of log information can affect device performance and
be a nuisance to users during configuration. You can disable PPP log displaying by using the
pppoe-server log-information off command.
Examples
# Disable PPP log displaying.
<Sysname> system-view
[Sysname] pppoe-server log-information off
pppoe-server max-sessions local-mac
Use pppoe-server max-sessions local-mac to set the maximum number of PPPoE sessions allowed with
regard to the local MAC address on a device operating as a PPPoE server.
Use undo pppoe-server max-sessions local-mac to restore the default.
Syntax
pppoe-server max-sessions local-mac number
undo pppoe-server max-sessions local-mac
Default
The maximum number of PPPoE sessions allowed with regard to the local MAC address is 100.
Views
System view

HP 830 Specifications

General

Manageable	Yes
Ports	24 x 10/100/1000 ports, 4 x SFP ports
Power Supply	Internal power supply
Operating Temperature	32°F to 113°F (0°C to 45°C)
Dimensions	17.32 x 10.24 x 1.72 in (44 x 26 x 4.37 cm)