HP 830 User Manual

113
Table 25 Command output
Field Descri
p
tion
Global status of LLDP Indicates whether LLDP is globally enabled.
LLDP neighbor information last
changed time
Time when the neighbor information was last updated.
Transmit interval LLDP frame transmission interval.
Hold multiplier TTL multiplier.
Reinit delay LLDP re-initialization delay.
Transmit delay LLDP frame transmission delay.
Trap interval Trap transmission interval.
Fast start times
Number of the LLDP frames sent each time fast LLDP frame transmission
is triggered.
Port 1 LLDP status of port 1.
Port status of LLDP Indicates whether LLDP is enabled on the port.
Admin status
LLDP mode of the port:
• Tx_Rx—The port sends and receives LLDP frames.
• Rx_Only—The port only receives LLDP frames.
• Tx_Only—The port only sends LLDP frames.
• Disable—The port does not send or receive LLDP frames.
Trap Flag Indicates whether trapping is enabled.
Polling interval LLDP polling interval, which is 0 when LLDP polling is disabled.
Number of neighbors Number of LLDP neighbors connecting to the port.
Number of MED neighbors Number of MED neighbors connecting to the port.
Number of CDP neighbors Number of CDP neighbors connecting to the port.
Number of sent optional TLV
Number of optional TLVs contained in an LLDP frame sent through the
port.
Number of received unknown TLV Number of unknown TLVs contained in all received LLDP frames.
display lldp tlv-config
Use display lldp tlv-config to display the types of advertisable optional LLDP TLVs of a port.
Syntax
display lldp tlv-config [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level

HP 830 Specifications

General

Manageable	Yes
Ports	24 x 10/100/1000 ports, 4 x SFP ports
Power Supply	Internal power supply
Operating Temperature	32°F to 113°F (0°C to 45°C)
Dimensions	17.32 x 10.24 x 1.72 in (44 x 26 x 4.37 cm)