75
Table 17 Command output
Field Descri
tion
Aggregation Interface Type Aggregate interface type: BAGG (Layer 2 aggregate interface).
Loadsharing Type
Load sharing type:
• Shar—Load sharing.
• NonS—Non-load sharing.
AGG Interface Type and number of the aggregate interface.
Select Ports Total number of Selected ports.
Unselect Ports Total number of Unselected ports.
Share Type Load sharing type.
display link-aggregation verbose
Use display link-aggregation verbose to display detailed information about the aggregation groups
corresponding to the aggregate interfaces.
Syntax
display link-aggregation verbose [ bridge-aggregation [ interface-number ] ] [ | { begin | exclude |
include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
bridge-aggregation: Displays detailed information about the Layer 2 aggregation groups corresponding
to Layer 2 aggregate interfaces.
interface-number: Specifies an existing Layer 2 aggregate interface by its number. The value range
varies by device model. For more information, see About the Command References for HP Unified
Wired-WLAN Products.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If you specify the bridge-aggregation interface-number option, the command displays information about
the specified Layer 2 aggregation group.
If you specify the bridge-aggregation keyword and do not specify the interface-number argument, the
command displays information about all Layer 2 aggregation groups.