HP 830

98
FPGA fast forwarding configuration commands
Support for the commands depends on the device model. For more information, see About the
Command References for HP Unified Wired-WLAN Products.
fpga portal-statistics enable
Use fpga portal-statistics enable to enable portal user traffic statistics for FPGA fast forwarding.
Use undo fpga portal-statistics enable to diable portal user traffic statistics for FPGA fast forwarding.
Syntax
fpga portal-statistics enable
undo fpga portal-statistics enable
Default
Portal user traffic statistics for FPGA fast forwarding is enabled.
Views
System view
Default command level
2: System level
Examples
# Disable portal user traffic statistics for FPGA fast forwarding.
<sysname> system-view
[sysname] undo fpga portal-statistics enable
fpga work-mode fast-forwarding
Use fpga work-mode fast-forwarding to enable FPGA fast forwarding.
Use undo fpga work-mode fast-forwarding to disable FPGA fast forwarding.
Syntax
fpga work-mode fast-forwarding
undo fpga work-mode fast-forwarding
Default
FPGA fast forwarding is enabled.
Views
System view
Default command level
3: Manage level