HP 830 User Manual

3
Parameters
text: Specifies the interface description, a case-sensitive string of 1 to 80 characters.
When you specify a description, follow these guidelines:
• Each Unicode character takes the space of two regular characters.
• To use Unicode characters or symbols in an interface description, install a specific IME and log in
to the device through remote login software that supports the character type.
• When the length of a description string reaches or exceeds the maximum line width on the terminal
software, the software starts a new line. This possibly breaks a Unicode character in half and might
result in garbled characters at the end of a line.
Examples
# Change the description of interface Ten-GigabitEthernet 1/0/1 to lanswitch-interface.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] description lanswitch-interface
Related commands
display interface
display interface
Use display interface to display Ethernet interface information.
Syntax
display interface [ interface-type ] [ brief [ down ] ] [ | { begin | exclude | include } regular-expression ]
display interface interface-type [ interface-number ] [ brief ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-type: Specifies an interface type.
interface-number: Specifies an interface number.
brief: Displays brief interface information. If you do not specify this keyword, the command displays
detailed interface information.
down: Displays information about interfaces in the down state and the causes. If you do not specify this
keyword, this command displays information about interfaces in all states.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.

HP 830 Specifications

General

Manageable	Yes
Ports	24 x 10/100/1000 ports, 4 x SFP ports
Power Supply	Internal power supply
Operating Temperature	32°F to 113°F (0°C to 45°C)
Dimensions	17.32 x 10.24 x 1.72 in (44 x 26 x 4.37 cm)