HP 830 User Manual

84
Layer 2 forwarding configuration commands
Normal Layer 2 forwarding configuration
commands
display mac-forwarding statistics
Use display mac-forwarding statistics to display Layer 2 forwarding statistics.
Syntax
display mac-forwarding statistics [ interface interface-type interface-number ] [ | { begin | exclude |
include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Displays the statistics of an interface specified by its type and
number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no parameter is specified, Layer 2 forwarding statistics for all interfaces is displayed.
Examples
# Display the Layer 2 forwarding statistics for all interfaces.
<Sysname> display mac-forwarding statistics
Total received: 888
Filtered:111 STP discarded:0
Broadcast:0 Multicast:0
Unknown Unicast:0 Invalid Tag:0
Total deliver to up: 111
L2 protocol:11 Local MAC address:100

HP 830 Specifications

General

Manageable	Yes
Ports	24 x 10/100/1000 ports, 4 x SFP ports
Power Supply	Internal power supply
Operating Temperature	32°F to 113°F (0°C to 45°C)
Dimensions	17.32 x 10.24 x 1.72 in (44 x 26 x 4.37 cm)