HP 830 User Manual

61
Ten-GigabitEthernet1/0/2 enable
WLAN-ESS1 enable
WLAN-DBSS1:2 enable
Table 12 Command output
Field Descri
p
tion
Mac-address learning status of the switch Global MAC address learning status (enabled or disabled).
Learning Status
MAC address learning status (enabled or disabled) for an
interface.
display mac-address statistics
Use display mac-address statistics to display the statistics of the MAC address table.
Syntax
display mac-address statistics [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the statistics of the MAC address table.
<Sysname> display mac-address statistics
MAC TYPE LEARNED USER-DEFINED SYSTEM-DEFINED IN-USE AVAILABLE
Dynamic Unicast 20 0 0 20
Static Unicast 0 0 0 0 8192
Total Unicast 20 8192
Dynamic Multicast 0 0 0 0
Static Multicast 0 0 0 0 0
Total Multicast 0 0

HP 830 Specifications

General

Manageable	Yes
Ports	24 x 10/100/1000 ports, 4 x SFP ports
Power Supply	Internal power supply
Operating Temperature	32°F to 113°F (0°C to 45°C)
Dimensions	17.32 x 10.24 x 1.72 in (44 x 26 x 4.37 cm)