HP 830

97
Related commands
pppoe-server abnormal-offline-percent threshold
reset pppoe-server
Use reset pppoe-server to terminate a PPPoE session on the PPPoE server side.
Syntax
reset pppoe-server { all | interface interface-type interface-number | virtual-template number }
Views
User view
Default command level
2: System level
Parameters
all: Terminates all the PPPoE sessions.
interface interface-type interface-number: Specifies a port by its type and number.
virtual-template number: Specifies a VT interface by its number.
Examples
# Terminate the session established based on interface Virtual-template 1 on the PPPoE server side.
<Sysname> reset pppoe-server virtual-template 1